Oce TCS300 User Manual page 141

How to place an ink tank
Attention: Make sure that you only use Océ TCS300 ink tanks. Using TCS400
ink tanks will damage your printer!
Attention: Make sure that you replace an ink tank with a tank that contains ink
of the same colour.
Hold the ink tank with the colour of the label towards you.
1.
The ink tanks are arranged in the same sequence as shown on the printer operator
panel. From left to right, the sequence of the ink tanks is black, cyan, magenta,
yellow, black (KCMY). A label on the ink tank indicates the colour of the ink in the
ink tank.
Note: Do not shake the ink tank or touch the opening of the ink tank.
Slide the ink tank into the slot until you feel a resistance and stop.
2.
Note: The ink tank fits only in one way . The ink tank fits only into the slot dedicated
for the colour. When you attempt to place the ink tank the wrong way or in the wrong
slot, the ink tank will not fit. Do not attempt to force it.
Press the dimpled recess in the ink tank inward and downward until the ink tank
3.
clicks into place.
When the printer detects the full ink tank, the ink level indicator on the printer
operator panel displays 100%.
Note: The printer first refills the intermediate ink storage tank. Therefore the ink
level indicator on the printer operator panel can decrease to about 95%.
Replace the ink tanks
141