Oce TCS300 User Manual page 50

Configure the network settings of the Océ TCS300
The screen displays 'Set IP address for adapter 1'.
11.
[37]
Press the keys for - and + to define the IP address.
After you finish an octet, press the key for 'Next' to go to the next octet.
Press the key for 'Next' after you finish the last octet. The screen displays 'Set subnet
12.
mask for adapter 1'.
[38]
Press the keys for - and + to define the subnet mask.
After you finish an octet, press the key for 'Next' to go to the next octet.
Press the key for 'Next' after you finish the last octet. The screen displays 'Set default
13.
gateway for adapter 1'.
[39]
Press the keys for - and + to define the default gateway.
After you finish an octet, press the key for 'Next' to go to the next octet.
After you finish the last octet, the wizard will lead you through a series of dialogues
14.
where you can configure DNS, and the primary and secondary WINS.
After you completed these dialogues, the screen shows an overview of all the
15.
network settings.
50 Chapter 3 Prepare the Océ TCS300 for use