Table of Contents
Advertisement
Configuration
Set the product in one of the standalone modes to control without a DMX controller.
(Standalone)
1.
2.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
Automatic Mode
To enable the Automatic Mode, do the following:
1.
2.
3.
4.
5.
Certain programs will have additional functionality. To find these options, press
<ENTER> after selecting an auto program. Then press <UP> or <DOWN>. Not every
program will feature all the added functionality.
Page 16 of 28
Connect the product to a suitable power outlet.
Turn the product on.
Press <MODE> repeatedly until SYS, ACt, SLAv, or S-1r shows on the display.
Use <UP> or <DOWN> to select ACt.
Press <ENTER>.
Use <UP> or <DOWN> to choose your desired program (A000–A023).
Press <ENTER>.
Function
F000–F100
SL.00–SL.32
P000–P100
C000–C100
Description
Flash speed (slow to fast)
Sound sensitivity
Run speed (slow to fast)
Dimmer (brightness increasing)
Freedom™ series User Manual (Rev. 06)
Advertisement
Table of Contents
