Table of Contents
Advertisement
5. T
I
ECHNICAL
NFORMATION
Product
Dust build-up reduces light output performance and can cause overheating. This can
lead to reduction of the light source's life. To maintain optimum performance and
Maintenance
minimize wear, you should clean your lighting products at least twice a month. However,
be aware that usage and environmental conditions could be contributing factors to
increasing the cleaning frequency.
To clean the product, use the following instructions:
Always dry the transparent surfaces carefully after cleaning them.
Page 24 of 28
Unplug the product from power.
Wait until the product is cold.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on
the external surface/vents.
Clean all transparent surfaces with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
Softly wipe any dirt or grime to the outside edge of the transparent surface.
Gently polish the transparent surfaces until they are free of haze and lint.
Freedom™ series User Manual (Rev. 06)
Advertisement
Table of Contents
