Table of Contents
Advertisement
4 Ch
Channel Function
1
Dimmer
2
Fine Dimmer
3
Red Shift
4
Dimmer Speed*
3 Ch
Channel Function
1
Dimmer
2
Red Shift
3
Dimmer Speed*
*Hold desired dimmer speed value for 3 seconds, then release. This changes the
dimmer speed setting in the menu.
Configuration (Standalone)
Use standalone configuration to operate the product without a DMX controller.
Static Mode
The Static mode allows for permanent dimmer and strobe presets without a DMX controller.
1.
Go to the Static main level.
2.
Select Dimmer or Strobe.
3.
Select the desired value (0–255).
Auto Programs
Auto programs allow for dynamic blinder effects without a DMX controller.
1.
Go to the Auto Show main level.
2.
Select the desired auto (Auto 1–3).
3.
Select the desired speed (001–100).
The auto programs cannot be edited.
Red Shift
The Red Shift function causes the amber LEDs to imitate the appearance of a lamp when dimming.
1.
Go to the Red Shift main level.
2.
Select On or Off.
Page 10 of 16
Value
Percent/Setting
000
255 0–100%
000
255 0–100%
000
On
001
255 Off
000
051 Current dimmer speed mode
052
101 Dimmer speed mode off (linear dimmer)
102
152 Dimmer speed mode 1 (fastest)
153
203 Dimmer speed mode 2
204
255 Dimmer speed mode 3 (slowest)
Value
Percent/Setting
000
255 0–100%
000
On
001
255 Off
000
051 Current dimmer speed mode
052
101 Dimmer speed mode off (linear dimmer)
102
152 Dimmer speed mode 1 (fastest)
153
203 Dimmer speed mode 2
204
255 Dimmer speed mode 3 (slowest)
Operation
STRIKE P38 User Manual Rev. 1
Advertisement
Table of Contents
