Table of Contents
Advertisement
3. S
ETUP
AC Power
The Freedom™ series has an auto-ranging power supply that works with an input
voltage range of 100~240 VAC, 50/60 Hz.
To determine the power requirements (circuit breaker, power outlet, and wiring), use the
current value listed on the label affixed to the product's back panel, or refer to the
product's specifications chart. The listed current rating indicates the product's average
current draw under normal conditions.
Always connect the product to a protected circuit (circuit breaker or fuse). Make
sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0% to 100% switch.
Battery Life
The battery life indicator located on the product displays the remaining amount of
internal battery life. Use the chart below to find out how much battery life remains per
Indicator
charge cycle. The light to the far right flashes during charging.
Battery
The Freedom™ series comes with a non-replaceable lithium-ion battery for cable-free
operation.
Maintenance
The Freedom™ series should be charged 24 hours prior to initial use for optimal
battery usage.
To keep the battery in optimal operating condition, store the product in a cool, dry place
and charge at least once every 30 days when not in use.
Avoid exposure to extreme temperatures. If the product is exposed to extreme cold or
hot temperatures, warm up/cool down the product before use and before charging.
Run Time Table
Freedom™ series User Manual (Rev. 06)
Maximum Run Time
8 hours
Recharge Time
6 hours
Page 9 of 28
Advertisement
Table of Contents
