Remote IP Address
Enter the remote T3SU 300's IP address to provide network
management access through the local T3SU 300. See the section
Remote SNMP Management Application on page 7-7 for more
information.
IP Security
Enable or disable the IP Security option. If enabled, the unit accepts
management commands and TELNET sessions from the IP
addresses entered into the IP H
IP Hosts
Enter up to 16 IP addresses of management stations from which the
unit should accept management commands. These addresses are
only applicable if IP S
Management Port
Assign the management port to be either LAN, FDL (facility
datalink), or the AUX P
Modem Mode
Select the
located on the rear panel of the T3SU 300, provides a telephone line
(POTS) for connecting to the internal V.34 modem. The modem
interface can be configured for dial-in service in VT-100, SLIP, and
PPP modes. In addition, the T3SU 300 is capable of dial-out
operation to report error conditions. All modem options can be
configured in the D
S
YSTEM
D
IALUP
Selections for the M
PPP, and SLIP. If the M
set to A
61200217L1-1
ECURITY
.
ORT
port function for your application. The
AUX
O
IALUP
PTIONS
M
C
ANAGEMENT
ONFIGURATION
O
are described on page 3-21.
PTIONS
M
ODEM
ODE
ANAGEMENT
P
, the PPP and SLIP options are available.
UX
ORT
T3SU 300 User Manual
Chapter 3. Configuration
fields.
OSTS
is enabled.
menu located on the second
screen. See Figure 3-10. The
include dialup options for VT-100,
P
option (see page 3-15) is
ORT
port,
AUX
3-15