Delete Unit; Default Unit Passcode; Snmp Read Community; Snmp Read/Write Community - ADTRAN TSU 610 User Manual

SNMP Read Community

SNMP Read/Write Community

61200610L2-1

Delete Unit

Deletes an entry in the table.

Default Unit Passcode

Sets the default passcode for all devices in the table that have
passcodes set to
table.
OK
Returns to the Configure Agent menu.
SNMP Read Community Name defaults to public. NMSs
using this community name have Read Access for all
supported MIB objects but do not have the ability to change
MIB objects. This value must be set to the same value on both
the TSU 610 and the NMS (OpenView®, etc.) in order for the
NMS to have Read Access to MIBs supported by the TSU 610.
This value must be a text string of 16 characters or less.
SNMP NMS using this community name have full Read/
Write Access to all supported MIB objects (defaults to
private). This setting must be the same value on both the
TSU 610 and the NMS in order for the NMS to have Read/
Write Access to MIBS supported by the TSU 610. This value
must be a text string that is 16 characters or less.
To access units external to the TSU 610 (proxied units) using an
SNMP MIB browser, append a period and the Unit ID of the ex-
ternal device to the Read Only and Read/Write community name
used in the MIB Browser, for example, public.4. See Appendix A,
Understanding SNMP on page A-1, for more information.
TSU 610 User Manual
, or for any unit not listed in the
DEFAULT
Chapter 4. T1 Network Interface
4-35