Installing The Document Feed Tray - NEC NEFAX655e Manual

Installing the Document Feed Tray

Attaching the Power Cord and Telephone Cords
Unpacking & Installation
1
Insert the two tabs into the
corresponding slots beside
the Control Panel.
2
Press down firmly but
evenly until they snap into
place.
1
Make sure the Main ON/
OFF Switch is in the OFF
position.
2
Connect one end of the
Power Cord to the Power
Cord Receptacle on the Fax
unit.
3
Plug the other end into the
wall receptacle.
Note: Make sure the wall
power meets the
specification for this unit.
Setting Up Fax Unit
A - 6