Setting The Power Save Mode - NEC NEFAX655e Manual

Machine Operations

Setting the Power Save Mode

This program allows the user to set the fax unit to automatically enter the power saving
mode at a specified time. You can also set the Power Save Mode to OFF, so that the unit
never goes into the power saving mode. If the ON time and the OFF time are set the
same, the Power Save Mode will remain ON continuously.
4 - 11
1
Press the Program key and scroll through the
menus until you reach the Machine Operations
menu and press YES.
2
Press 7 or press the down arrow six times to reach
the Power Saver Mode Menu. Press YES.
3
Use the Left/Right Arrow keys to select either OFF
or TIMER and press YES.
Note: The ON time refers to the time the unit will go into the Power Save Mode.
The OFF time is the time it will re-enter a READY or STANDBY mode.
4
Enter the time you wish the unit to enter the Power
Save Mode and press YES.
5
Enter the time you wish the unit to leave the Power
Save Mode and return to normal operation.
Note: There are three situations to leave the
Power Save Mode and return to normal operation.
1.Press Wakeup key
2.Telephone rings.
3.Time up for Timer TX.
Note: If I-Fax / PCL4 / GDI / PCL5e is optioned or operated, these devices
cannot wakeup the machine from the Power Save Mode.
Before using these devices, be sure the machine is in normal operation.
If the machine is in the Power Save Mode, press the Wakeup key.
If you wish to use these devices anytime, set the Power Save Mode to
OFF.
MACHINE OPERATION?
YES / or 1-9
7 POWER SAVE MODE?
OK=YES
OFF *TIMER
-SELECT&PUSH"YES"-
ON TIME=_0:00
OK=YES
OFF TIME=_0:00
OK=YES
Facsimile Programming