NEC NEFAX655e Manual page 31

Using Combination Dial
Basic Operations
This is used when the number exceeds the 30 digit limit for a single location. The
number is split between two locations and the two are automatically linked when
the first of the two is used. It is possible to input dialing numbers continuously.
You can enter another One-Touch, Speed Dial or Ten Key followed by the combi-
nation dial numbers (telephone numbers last digits is '+' in One Touch or Speed
Dial key). The telephone number limit is 30 digits.
1
Place your document face down on the Document Feed Tray.
2
Adjust the Document Side Guides to touch the edges of the document.
3
Use the TYPE ORG. key to select the desired contrast.
4
Use the Resolution key to select the desired resolution.
5
Press a One-Touch key.
•
The One-Touch number should have a "+" at the end indicating an
additional key has been programmed to extend the length of the
number.
6
Press the second One-Touch key containing the additional numbers and
press START.
•
The unit scans the document into memory and sends it to the location
you selected.
•
The unit automatically returns to standby mode when finished
transmitting.
7
To stop a transmission, press the Stop key.
Sending a Document
2 - 4