Using Combination Dial - NEC NEFAX655e Manual

Using Combination Dial

Advanced Facsimile
Because the telephone number in each One-Touch and Speed Dial location is
limited to 30 digits, it might be necessary to combine two or more One-Touch or
Speed Dial locations to call one location.
Procedure
1
Select the Original Type, Resolution if
necessary, and place your document in the
Document Feeder Tray face down.
2
Press any of the One-Touch or Speed Dial
keys you have programmed, and press
YES.
3
The following messages appear briefly to
confirm your selection.
4
If the displayed number has a "+" as the
last digit, additional numbers must be used
to dial this locaiton.
5
At this point, you have the option to enter the additional numbers using the
Ten-Key Pad, selecting another One-Touch key, or entering another Speed
Dial number.
6
Enter your selection.
7
To begin transmitting, press START.
Using Combination Dial
NOV.06 15:38
-SET DOC. FACE DOWN-
OT01=1234+
OK=YES
ONE TOUCH DIAL 01
1234+
12345678
(TX=START)
100%
3 - 12