Scan Settings - Muratec OFFICEBRIDGE EXPANSION KIT (OB450) User Manual

Scan Settings

You can set the retention period for scanned documents.
NOTE: If the administrator is registered, you should log-in as an administrator to
access this setting.
1
Log-in to "OfficeBridge".
2
Click [Scan Settings] on the "Admin Tools" tab.
The "Scan Settings" screen will appear.
Item
"Document Hold Time" Specifies the retention period of scanned documents in
[Save]
[Close]
3
Adjust the settings and select [Save] to register them.
3-36 Using the Admin Tools
Description
the "Scan" tab.
To hold indefinitely, check "Do not delete automatically".
To delete a document after the retention period, check
"Delete automatically" and specify the retention period
from 1-99 days.
NOTE: The retention period does not include the pres-
ent day. So if you select one day, the document
would be deleted at 12:01 a.m. the day after
tomorrow.
The factory setting is "Do not delete automatically".
Select this to register the settings.
Select this to close the dialog box.