Muratec MFX-1300 Field Engineering Manual page 69

Attribute 4 - Individual Autodialer Setting
Initial
Switch
Setting
7 0 ANSam detection
(Only for MFX-1700/1600)
0: Yes
1: No
6 0 V.34 transmission
(Only for MFX-1700/1600)
0: Yes
1: No
5 0 Factory use only
4 0 ECM mode
0: On
1: Off
3 0 Retransmit automatically
when receiving RTN/PIN
signals
0: Yes
1: No
2 1 Factory use only
1 0 Factory use only
0 0 Factory use only
Adjust
During the V8 handshake, if some noise disturbs
the handshake and an error occurs, set to "1".
Individual setting for V.34 transmission.
Determines ECM mode. ECM mode reduces
document memory and may lengthen transmission
and reception times.
When set to "1", retransmission disables
automatically if receiving RTN/PIN signals.
3-39
(Equivalent to Memory Switch B:3)
Usage/Comments