Rs-232C Interface; Packaging Contents; Installation - Muratec MFX-1300 Field Engineering Manual

6.3 RS-232C interface

Packaging contents:

(1) RS-232C PCB.................................................1
(2) Connector PCB ...............................................1
(3) Bracket............................................................1
(4) Connection cable ............................................1
(5) One screw.......................................................1
(6) Ferrite core......................................................1
(7) Operating instructions .....................................1

Installation

1. Turn the fax machine off.
2. Remove two screws on the RS-232C PCB, and then attach the bracket to the RS-232C PCB with them.
Join the RS-232C PCB and the Connector PCB as shown below:
Note: The bracket may have been attached to the RS-232C PCB.
3. Remove the mounting screw holding the option cover A in place. Then remove the option cover A.
4. Use pliers to gently punch out the rectangular connector space located in the right of the option cover A.
6-4