Cleaning The Fbs; If You Have Unsatisfactory Printout Quality - Muratec MFX-2500 Operating Instructions Manual

5
Open the inner cover.
Important: You must hold the cover open. It won't stay open by itself.
6
Use the cloth with the rollers cleaner to
clean the face of the rollers. Rotate the
rollers by hand to allow cleaning of the
entire roller surface.
7
Close the inner cover.
8
Close the adf cover, making sure both
sides are snapped down securely.
9
Open the platen cover.
10
Use the cloth with isopropyl alcohol to
clean the contact glass.
11
Close the platen cover.

Cleaning the FBS

1
Open the platen cover.
2
Get a soft, lint-free cloth and moisten it with isopropyl alcohol.
Important: Make sure the cloth doesn't have any rough areas. Otherwise, it
could scratch the glass surface of the FBS.
3
Using the cloth, gently clean the glass
surface of the FBS and the white back-
ground area on the underside of the
platen cover.

If you have unsatisfactory printout quality

Your machine automatically cleans its charger and transport roller, two items which
are very important to printout quality. So, if you notice poor printout quality
(whether on received faxes or on copies), it may mean that your machine requires
service. Review "Print quality problems" (pages 2.6-2.7), and see whether any of the
proposed solutions helps your machine. If none do, please call your authorised
Muratec dealer.
Just in case ...
2.9