Lantronix ETS Reference Manual page 265

Command Reference
Errors
Parameters
Examples
See Also
If the port is a virtual port, irrelevant information such as baud rate, parity, and
flow control will not be displayed.
Any List on a virtual port will display template port configuration.
Status and Counters parameters are not valid with List.
Counters is also not valid for virtual ports.
All
Displays information about all ports.
Access
Displays information about all local ports having a particular access type.
portnum
Displays information about a specified port.
Characteristics
Displays the port's settings, such as baud rate, parity, preferred services, name,
username, and group codes.
Counters
Displays the port's local and remote accesses, as well as the communication
errors on the device.
Status
Displays the port's connection status: the number of sessions and information
about the current connection. It also shows the current flow control state and
the state of the DSR and DTR serial signals.
Summary
Displays the access type, offered services, and the login status of the port.
Local> LIST PORT ACCESS DYNAMIC SUMMARY
Set/Define Port Commands, page 12-27; Chapter 5, Ports; Status Displays,
page 6-9.
Show/Monitor/List Commands
12-103