Set/Define Service Appletalk; Set/Define Service Banner - Lantronix ETS Reference Manual

Command Reference
Parameters
The Set/Define Service options do not necessarily apply to virtual sessions. See
Note:
Set/Define Service Virtual on page 12-92 for more information.
See Also

12.47.2 Set/Define Service AppleTalk

SET
SERVICE ServiceName APPLETALK
DEFINE
Specifies whether AppleTalk clients will be able to use the service. If enabled, the service name will be
displayed as a selectable printer in Macintosh chooser screens.
Applies To
Restrictions
See Also

12.47.3 Set/Define Service Banner

SET
SERVICE ServiceName BANNER
DEFINE
Specifies whether the ETS will print a banner page before starting a print job. Banners should be disabled
(the default) for all PostScript and plotter (binary) data.
Applies To
Restrictions
See Also
ServiceName
Enter a service name of up to 14 alphanumeric characters.The default service
name is based on the ETS name.
Clear/Purge Service, page 12-7; Show/Monitor/List Services, page 12-111;
Creating Services, page 4-12.
ENABLED
DISABLED
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
You must be the privileged user to use this command.
Clear/Purge Service, page 12-7; Show/Monitor/List Services, page 12-111;
TCP/Telnet Service Sockets, page 4-14; Macintosh Service Configuration,
page 10-2.
ENABLED
DISABLED
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
You must be the privileged user to use this command.
Clear/Purge Service, page 12-7; Show/Monitor/List Services, page 12-111;
TCP/Telnet Service Sockets, page 4-14.
Set/Define Service Commands
12-85