Remove Queue - Lantronix ETS Reference Manual

Command Reference
Errors
Parameters
Examples
See Also

12.32 Remove Queue

REMOVE QUEUE
SERVICE ServiceName
Removes requests for local services from that service's queue.
Applies To
Restrictions
Parameters
Purge SLIP will return an error if the specified port does not have SLIP
enabled, or if the IP address specified is not associated with that port.
All
Clears all of the SLIP settings for the ETS (entries for all ports and the Default
ETS setting).
Port portnum
Clears the SLIP entry for the specified port only.
Default
Clears the default SLIP setting for the ETS.
Local> PURGE SLIP Port 4
Set/Define SLIP, page 12-95; Show/List SLIP, page 12-112; Serial Line
Internet Protocol (SLIP), page 2-12; SLIP, page 4-6.
ALL
ENTRY number
NODE NodeName
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
You must be the privileged user to use this command.
All
Removes all requests in the local ETS queue.
Entry number
Removes the specified queue entry. Use the Show Queue command to display
the queues and entries by number.
Node NodeName
Removes all queue requests originating from the specified node.
Service ServiceName
Removes all requests queued to the specified local service.
Remove Queue
12-19