Show/Monitor/List [Telnet] Hosts; Show/Monitor Users - Lantronix ETS Reference Manual

Command Reference

12.52.15 Show/Monitor/List [Telnet] Hosts

SHOW
TELNET HOSTS
MONITOR
LIST
Displays either the currently available TCP/IP hosts or the ones that have been defined in the local host
table. Hosts will be displayed along with the method of discovery, such as rwho, a connection, or a host
table look-up. There will be a marking to denote the current nameserver and/or gateway.
The Telnet and Host keywords are interchangeable as well as combinable. You can specify one or the other,
or both, and get the same information.
Applies To
Restrictions
Parameters
Examples
See Also

12.52.16 Show/Monitor Users

SHOW
USERS username
MONITOR
Displays the current users logged onto the ETS. If a username is given, only information for that user is
shown.
Applies To
Restrictions
See Also
ALL
hostname
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
You must be the privileged user to use the Monitor Hosts command.
ALL
Displays all known TCP/IP hosts (the default).
hostname
Displays host information for the specified port only. Wildcards are allowed.
Local> SHOW TELNET HOSTS ALL
Local> LIST HOST MYVAXSTN
Clear/Purge Hosts, page 12-5; Set/Define Telnet Hosts, , page 12-99; Local
Host Table, page 2-10; Local Host Table, page 4-6; Status Displays, page 6-9.
EPS4, ETS4P, ETS8, ETS8P, ETS16, ETS16P
You must be the privileged user to use the Monitor users command.
Set/Define Port Username, page 12-54; Status Displays, page 6-9.
Show/Monitor/List Commands
12-113