Lantronix MSS Reference Manual page 90

Error Bits
00040000
00020000
00010000
00008000
00004000
00002000
00001000
00000800
00000400
00000200
00000100
00000080
00000040
00000020
00000010
00000008
00000004
00000002
00000001
C-4
Unassigned.
Internal error. May occur on some cards in conjunction with other described
error codes.
The 802.11 card in use is not compatible with the regulatory region to which
the unit has been programmed.
Internal error.
Internal error. May occur on some cards in conjunction with authentication or
association failures, or other configuration mismatches.
Received an 802.11 packet that was too large to be handled.
Internal error.
Failed to queue a data packet that could not be sent immediately for later
transmission. It was dropped.
Internal error.
Failed to find, sync to, and associate with an AP or ad-hoc network within a
reasonable time. Most likely there is no AP or ad-hoc network within range
that satisfies the unit's ESSID, NETWORK-TYPE, and CHANNEL
parameters.
Received an 802.11 data packet that was not encapsulated as per RFC1042 or
802.1h. Unit will still decapsulate and interpret the packet. Some vendors'
APs trip this error when they send out "magic packets" containing proprietary
extensions not defined by the 802.11 spec.
Received an 802.11 data packet encapsulated in a completely foreign manner,
or not encapsulated at all. Unit will still attempt to interpret the packet, but
proper interpretation is not guaranteed. The packet may be dropped as
unintelligible.
Received an encrypted packet that could not properly be decrypted. Packet
was dropped.
Unspecified error during packet reception. At least one packet was dropped.
Absence of this error bit does not imply that all packets have been received
correctly, however.
A received packet failed CRC check and was dropped.
Internal error. May occur in conjunction with "no AP or ad-hoc network
within range" errors.
Internal error.
Internal error.
Internal error.
Show 802.11 Errors