Show Services
Parameters
Defaults
See Also
2.94 Show Services
serviceName
SHOW SERVICES
Displays the characteristics of the LAT services on the network.
Restrictions
Errors
Parameters
See Also
2.95 Show Session
SHOW SESSION
Displays information about the serial port's current session(s). For the MSS4, this command shows the
current session(s) for the current serial port.
See Also
2-66
Bootparams
Displays MSS parameters that relate to the boot procedure and software
loadfile.
Counters
Displays Ethernet and TCP/IP error information.
Characteristics
Displays server settings including hardware address, timer limit, password
limit, session limit, retransmit limit, IP address, subnet mask, nameserver,
gateway, and more.
Characteristics
Status Displays, page 7-6.
This list is masked by the service groups that the port is able to see. In other
words, users will not be able to see services to which they cannot connect.
Does not apply to MSSLite, MSS-VIA, or the MSS4.
serviceName
Specify a service whose information you want to see. Wildcards are permitted.
All services will be shown if no service is specified.
Status Displays, page 7-6.
Status Displays, page 7-6.
Command Reference
Need help?
Do you have a question about the MSS and is the answer not in the manual?