Table of Contents
Advertisement
Command Reference
2.96 Show SNMP
SHOW SNMP
Displays configured SNMP communities and their access modes (read-only or read/write). The default
community name is public, and allows read-only access. There is one additional user-configurable SNMP
community.
See Also
2.97 Show Users
SHOW USERS
Displays the current users logged into the MSS, their port usernames, and current connection information.
See Also
2.98 Show Version
SHOW VERSION
Displays operating software version information.
Errors
See Also
2.99 Source
filename
SOURCE hostname:
Downloads a configuration file from a TFTP host. The file is assumed to contain lines of server commands
to be executed. The Source command is most useful for trying out a configuration file before using the
Change Software command.
Errors
Parameters
Status Displays, page 7-6; Change SNMPSetComm, page 2-44.
Status Displays, page 7-6.
Applies to the MSS4 only.
Change Software, page 2-45
Only applies to the MSS-VIA and MSS4.
hostname:filename
Enter the TFTP hostname (either a text name or an IP address) followed by a
colon and the download path and file name.
Show SNMP
2-67
Advertisement
Table of Contents
Need help?
Do you have a question about the MSS and is the answer not in the manual?
Questions and answers