Change Inactive Logout; Change Inactive Timer - Lantronix MSS Reference Manual

Command Reference
Parameters
See Also

2.21 Change Inactive Logout

CHANGE PORT PortList INACTIVE LOGOUT
Determines whether a port will be automatically logged out after a period of inactivity. Any open
connections will be closed before logout. Inactivity is defined as having no keyboard or network activity on
the port. The inactivity period is set with the Change Inactive Timer command.
Restrictions
Parameters
In the absence of the PortList parameter, the configuration will affect the MSS4's
Note:
current port only.
Defaults
See Also

2.22 Change Inactive Timer

CHANGE SERVER INACTIVE TIMER
Sets the period of time after which a port with Inactive Logout enabled will be considered inactive and
automatically logged out.
Restrictions
Server
MSS4 only.
Secondary
Configures a gateway to be used when the primary gateway is unavailable.
IPaddress
Specify a host using the numeric IP address format. Specifying an IP address
of 0.0.0.0 removes the previously-defined gateway.
Change Subnet Mask, page 2-47.
DISABLED
ENABLED
Requires privileged user status.
Port
MSS4 only. Specifies a particular port or group of ports.
PortList
Specify a particular port or group of ports. Port numbers are specified with
integers between 1 and 4, and should be separated with commas (for lists) or
dashes (for ranges).
Disabled
Change Inactive Timer, page 2-25.
period
Requires privileged user status.
Change Inactive Logout
2-25