Change Silentboot; Change Snmpsetcomm - Lantronix MSS Reference Manual

Change Silentboot

Restrictions
Parameters
In the absence of the PortList parameter, the configuration will affect the MSS4's
Note:
current port only.
Defaults
2.55 Change Silentboot
CHANGE SERVER SILENTBOOT
Causes the unit to attempt to boot without sending any status messages to the console port (unless there are
errors).
Restrictions
Parameters
Defaults
See Also

2.56 Change SNMPSetComm

CHANGE SERVER SNMPSETCOMM
Creates an SNMP community name for the MSS and gives that community read/write access. By default,
the MSS has a single community ("public") with read-only access.
Restrictions
Parameters
2-44
Requires privileged user status.
Does not apply to the MSS485.
Port
MSS4 only. Specifies a particular port or group of ports.
PortList
Specify a particular port or group of ports. Port numbers are specified with
integers between 1 and 4, and should be separated with commas (for lists) or
dashes (for ranges).
Disabled
DISABLED
ENABLED
Requires privileged user status.
Server
MSS4 only.
Disabled
Show Server, page 2-65.
communityname
Requires privileged user status.
Server
MSS4 only.
communityname
Enter an alphanumeric string of up to 15 bytes.
Command Reference