Change Ipaddress; Change Ipsecurity - Lantronix MSS Reference Manual

Command Reference
Defaults
See Also

2.24 Change IPAddress

CHANGE SERVER IPADDRESS
Sets the MSS's IP address. The IP address must be set before any TCP/IP functionality is available. The
new IP address will take effect immediately.
Restrictions
Errors
Parameters
See Also

2.25 Change IPSecurity

CHANGE IPSECURITY
Adds entries to or edits entries in the IP Security table. The Ports parameter, applicable only to the MSS4,
restricts connections to the given IP address from certain ports, and connections from this address to the
specified ports.
Password
Prompts the user to enter the login password when attempting an incoming
connection.
Nopassword
Allows incoming connections without prompting for the login password.
Telnet, Nopassword
Change Loginpass, page 2-31.
IPaddress
Requires privileged user status.
You will receive an error if the MSS cannot use the specified IP address or if
there are currently any network connections.
Server
MSS4 only.
IPaddress
Specify the IP address in standard numeric format.
Change DHCP, page 2-21; the Getting Started chapter of your Installation
Guide.
BOTH
INCOMING
IPaddress
OUTGOING
PORTS portlist
ENABLED
DISABLED
Change IPAddress
2-27