Show 802.11 Errors
00000080
00000040
00000020
00000010
00000008
00000004
00000002
00000001
C.2.2 Rightmost Number
80000000
40000000
20000000
10000000
08000000
04000000
02000000
01000000
00800000
00400000
00200000
00100000
00080000
Authentication with the AP failed because either the unit or the AP sent an
incorrect authentication packet. Some APs will erroneously return this error
code when the problem is actually "authentication type not allowed".
Authentication with the AP failed because the AP does not allow the
authentication type requested by the unit.
Authentication or association with the AP failed for administrative reasons.
Reassociation with another AP serving the same ESS as the previous one failed
because the association could not be confirmed by the previous AP.
Association with the AP failed because the AP does not support all 802.11
options requested by the unit.
Authentication or association with the AP failed, or the unit was
deauthenticated or disassociated by the AP for a reason explicitly given as
"unspecified".
Could not find any beacons matching the network parameters the unit is
configured with. Most likely there is no AP or ad-hoc network within range
that satisfies the unit's ESSID, NETWORK-TYPE, and CHANNEL
parameters.
Internal error.
Unassigned.
Unassigned.
Unassigned.
Unassigned.
Unassigned.
Unassigned.
Unassigned.
Unassigned.
Unassigned.
Unassigned.
Unassigned.
Unassigned.
Unassigned.
Error Bits
C-3
Need help?
Do you have a question about the MSS and is the answer not in the manual?