Change Password Protect; Change Portname - Lantronix MSS Reference Manual

Change Password Protect

2.44 Change Password Protect
CHANGE PORT PortList PASSWORD PROTECT
Controls whether a password is needed to log into the MSS from a serial port. For models with a dedicated
console port (the MSS-Via, MSS485, and the MSSLite A and C), this command will also affect the serial
console port. To set the login password, use the Change Loginpass command.
Restrictions
Parameters
In the absence of the PortList parameter, the configuration will affect the MSS4's
Note:
current port only.
Defaults
See Also

2.45 Change Portname

CHANGE PORT PortList PORTNAME
Renames the specified serial port.
Restrictions
Parameters
In the absence of the PortList parameter, the configuration will affect the MSS4's
Note:
current port only.
Defaults
2-38
Requires privileged user status.
Port
MSS4 only. Specifies a particular port or group of ports.
PortList
Specify a particular port or group of ports. Port numbers are specified with
integers between 1 and 4, and should be separated with commas (for lists) or
dashes (for ranges).
Disabled
Change Loginpass, page 2-31.
name
Requires privileged user status.
Port
MSS4 only. Specifies a particular port or group of ports.
PortList
Specify a particular port or group of ports. Port numbers are specified with
integers between 1 and 4, and should be separated with commas (for lists) or
dashes (for ranges).
name
Enter a 16-character name composed of alphanumeric characters or the
underscore character. Enclose the password in quotation marks to preserve
case.
Port_1 (also Port_2, Port_3, and Port_4 for MSS4 only)
DISABLED
ENABLED
Command Reference