Change Password Incoming; Change Password Limit - Lantronix MSS Reference Manual

Command Reference

2.42 Change Password Incoming

CHANGE PORT PortList PASSWORD INCOMING
Controls whether the MSS will ask users for an incoming password when they attempt to connect to the
network socket connection ports (ports 200x and 300x, where x is the number of the desired serial port). See
Environment Strings on page B-1 for more information on network socket connections.
Restrictions
Parameters
In the absence of the PortList parameter, the configuration will affect the MSS4's
Note:
current port only.

2.43 Change Password Limit

CHANGE SERVER PASSWORD LIMIT
Limits the number of failures allowed when entering the privileged password, with the Set Privileged
command, to become the privileged user. After the specified number of retries, the port will be logged out.
The Change Privpass command is used to set the privileged password.
Restrictions
Parameters
Defaults
Requires privileged user status
Port
MSS4 only. Specifies a particular port or group of ports.
PortList
Specify a particular port or group of ports. Port numbers are specified with
integers between 1 and 4, and should be separated with commas (for lists) or
dashes (for ranges).
number
Requires privileged user status.
Server
MSS4 only.
number
Enter a value between 0 (no limit) and 100.
3
DISABLED
ENABLED
Change Password Incoming
2-37