Using This Guide; Purpose And Audience; Chapter Summary - Lantronix xPico User Manual

1. Using This Guide

Purpose and Audience

This guide covers xPico Device Server Module. It provides the information needed to
configure, use, and update the xPico firmware and is intended for OEMs and system
integrators who are embedding the xPico in their end product designs.

Chapter Summary

The remaining chapters in this guide include:
Document
2: Introduction
3: Using DeviceInstaller
4: Configuration Using Web
Manager
5: Configuration via Telnet or
Serial Port (Setup Mode)
6: Setup Mode: Server
Configuration
7: Setup Mode: Channel
Configuration
8: Setup Mode: Advanced
Settings
9: GPIO Interface
10: Firmware Upgrades
11: Monitor Mode
12: Troubleshooting
A: Binary to Hexadecimal
Conversions
B: Compliance
xPico User Guide
Description
Describes the main features of the xPico and the protocols
it supports.
Provides information for getting your unit up and running,
using DeviceInstaller to assign an IP address.
Details using the Web-Manager to set parameters such as
port and server properties.
Provides instructions for accessing Setup Mode (command
line interface) using a Telnet connection through the
network or a terminal or terminal emulation program
through the serial port.
Details the network (server) settings
Details the serial port settings.
Details expert and security settings and explains how to
reset the unit to factory default values.
Provides instructions for configuring the eight General
Purpose I/O pins (CP1-8).
Provides instructions for obtaining the latest firmware and
updating the xPico.
Provides instructions for accessing and using the
command line interface for monitoring the network and
diagnosing problems.
Describes common problems and error messages and how
to contact Lantronix Technical Support.
Provides instructions for converting binary numbers to
hexadecimals.
Provides compliance information.
9