Lantronix xPico Quick Start Manual
  1. Manuals
  2. Brands
  3. Lantronix Manuals
  4. Microcontrollers
  5. xPico
  6. Quick start manual
Lantronix xPico Quick Start Manual

Lantronix xPico Quick Start Manual

Hide thumbs Also See for xPico:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
xPico
Development Kit
Quick Start Guide
Part Number 900-623
Revision D January 2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the xPico and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lantronix xPico

Summary of Contents for Lantronix xPico

  • Page 1 Development Kit Quick Start Guide Part Number 900-623 Revision D January 2018...
  • Page 2 Intellectual Property © 2018 Lantronix, Inc. All rights reserved. No part of the contents of this publication may be transmitted or reproduced in any form or by any means without the written permission of Lantronix. Lantronix and DeviceLinx are registered trademarks of Lantronix, Inc. xPico and DeviceInstaller are trademarks of Lantronix, Inc.

  • Page 3: Table Of Contents

    What You Need to Know _________________________________________________ 4 Hardware Address ___________________________________________________ 4 IP Address _________________________________________________________ 4 Connecting an xPico Module — Network Method ______________________________ 5 Connecting an xPico Module — Serial Method ________________________________ 6 Install DeviceInstaller ____________________________________________________ 6 Assign an IP Address ____________________________________________________ 7...

  • Page 4: Introduction

    Ethernet modules. Please ensure that you have the correct module for your needs. The Evaluation Kit comes with the standard xPico serial to Ethernet device. If you wish to use the xPico-IAP then please ensure that you have the XPC10010MS-01 or later module.

  • Page 5: Connecting An Xpico Module - Network Method

    Note: Before wiring and powering on the xPico Evaluation Board please make sure that the correct xPico module for your needs is fitted. Removing and inserting the xPico module is quite simple and requires removing the fitted mounting clip and exchanging the module in the 40-pin socket.

  • Page 6: Connecting An Xpico Module - Serial Method

    Insert it into the slot on the Universal Power Supply; then plug the power supply into an outlet. 4. Connect the output plug of the power supply to the xPico Evaluation Board. The final serial connection setup should look like this: 5.

  • Page 7: Assign An Ip Address

    The unit IP address is set for DHCP by default at the factory. The hardware address is on the product label. Assign a static IP address if you do not want the network to assign an IP address to the xPico or do not have a DHCP server on the network.
  • Page 8 7. Click Assign and wait several seconds until a confirmation message appears. 8. Click Finish. 9. Select the xPico from the main window list and click ToolsPing. The results appear in the Status area. 10. Click Clear Status to clear the window to ping the device again.

  • Page 9: Configure Your Xpico Device

    4. Commit any changes as follows:  Every sub-page has an OK button that tells the xPico what changes to use, but it does not immediately change the configuration on the device.  When you are finished making all changes to the settings on various pages, then click Apply Settings, which makes the changes permanent and reboots the xPico.
  • Page 10 Enter. 6. When you are finished making all changes to the various settings, use the (S)ave option to save the new configuration by entering S. The unit automatically reboots. xPico Development Kit Quick Start Guide...
  • Page 11 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Lantronix XPC100100K-02...

Table of Contents