For detailed field descriptions, please reference the previous table.
Under WAN Interfaces, select the PVCs (All routing modes with firewall ON) where
the filter rule will apply. You may select all PVCs or just a subset. Filter rules are
arranged by PVC as shown under the VPI/VCI heading on the previous screen.
6.4.2
MAC Filtering
NOTE:
This option is only available in bridge mode. Other modes (i.e. PPPoE/A,
IPoA, MER) use
Each network device has a unique 48-bit MAC address. This can be used to filter
(block or forward) packets based on the originating device. MAC filtering policy
and rules for the CT-5361T can be set according to the following procedure.
The MAC Filtering Global Policy is defined as follows. FORWARDED means that all
MAC layer frames will be FORWARDED except those matching the MAC filter rules.
BLOCKED means that all MAC layer frames will be BLOCKED except those
matching the MAC filter rules. The default MAC Filtering Global policy is
FORWARDED. It can be changed by clicking the Change Policy button.
IP Filtering
(pg. 52) to perform a similar function.
54