Table of Contents
Advertisement
6.4 Security
6.4.1
MAC Filtering
Mac Filtering is only available for Bridged mode.
Each network device has a unique MAC address. You can block or forward the
packets based on the MAC addresses. The MAC Filtering Setup screen allows
setting up the MAC filtering policy and the MAC filtering rules. MAC Filtering is only
effective on ATM PVCs configured in Bridge mode.
The policy FORWARDED means that all MAC layer frames will be FORWARDED
except those matching with any of the specified rules in the following table.
BLOCKED means that all MAC layer frames will be BLOCKED except those
matching with any of the specified rules in the following table. The default is
FORWARD; you change by clicking the Change Policy button.
Choose Add or Remove to configure MAC filtering rules. The following screen
pops up when you click Add. Create a filter to identify the MAC layer frames by
specifying at least one condition below. If multiple conditions are specified, all of
them take effect. Click Apply to save and activate the filter.
59
Advertisement
Table of Contents
