Table of Contents
Advertisement
6.2 LAN
From this screen, LAN interface settings can be configured.
NOTE:
NAT is enabled so UPnP is shown above (see underlined notes below).
Consult the field descriptions below for more details.
IP Address: Enter the IP address for the LAN port.
Subnet Mask: Enter the subnet mask for the LAN port.
Enable UPnP: Tick the box to enable Universal Plug and Play.
This option is hidden when NAT disabled or if no PVC exists
Enable IGMP Snooping: Enable by ticking the box.
Standard Mode: In standard mode, multicast traffic will flood to
all bridge ports when no client subscribes to a multicast group –
even if IGMP snooping is enabled.
Blocking Mode: In blocking mode, the multicast data traffic will
be blocked and not flood to all bridge ports when there are no
client subscriptions to any multicast group.
DHCP Server:
To enable DHCP, select Enable DHCP server and enter starting
and ending IP addresses and the leased time. This setting
configures the router to automatically assign IP, default gateway
and DNS server addresses to every PC on your LAN.
46
Hide quick links:
Advertisement
Table of Contents
