Manual Quick Setup - Comtrend Corporation CT-5361T User Manual

4.2 Manual Quick Setup

STEP 1: Click Quick Setup and un-tick the DSL Auto-connect checkbox
enable manual configuration of the connection type.
Un-tick this checkbox to enable manual
setup and display the following screen.
STEP 2: Adjust the VPI/VCI settings for the connection you wish to establish. You
may also Enable Quality of Service (QoS) with its checkbox
STEP 3: On this screen, you can choose the connection type and select the
appropriate encapsulation mode. The available options are shown.
PPPoA- VC/MUX, LLC/ENCAPSULATION
PPPoE- LLC/SNAP BRIDGING, VC/MUX
MER- LLC/SNAP-BRIDGING, VC/MUX
IPoA- LLC/SNAP-ROUTING, VC MUX
Bridging- LLC/SNAP-BRIDGING, VC/MUX
You may also choose to Enable 802.1q (available in PPPoE, MER and
Bridging modes) and enter the VLAN ID, as shown below.
21
to
.