Table of Contents
Advertisement
Choose Add or Remove to configure MAC filtering rules. The following screen will
appear when you click Add. Create a filter to identify the MAC layer frames by
specifying at least one condition below. If multiple conditions are specified, all of
them must be met. Click Save/Apply to save and activate the filter rule.
Consult the table below for detailed field descriptions.
Field
Protocol Type
Destination MAC Address
Source MAC Address
Frame Direction
WAN Interfaces
Description
PPPoE, IPv4, IPv6, AppleTalk, IPX, NetBEUI, IGMP
Defines the destination MAC address
Defines the source MAC address
Select the incoming/outgoing packet interface
Applies the filter to selected bridge PVCs. These
rules are arranged according to bridge PVC, as shown
under the VPI/VCI heading on the previous screen.
55
Hide quick links:
Advertisement
Table of Contents
