System Log - Comtrend Corporation CT-5361T User Manual

9.2 System Log

This function allows a system log to be kept and viewed upon request.
Follow the steps below to configure, enable, and view the system log.
Step 1: Click Configure System Log as shown below.
Step 2: Select desired options and click Save/Apply.
Consult the table below for detailed descriptions of each system log option.
Option Description
Log Indicates whether the system is currently recording events. The user can
enable or disable event logging. By default, it is disabled. To enable it,
tick Enable and then Apply button.
Log Allows you to configure the event level and filter out unwanted events
level below this level. The events ranging from the highest critical level
"Emergency" down to this configured level will be recorded to the log buffer
on the CT-5361T SDRAM. When the log buffer is full, the newer event will
wrap up to the top of the log buffer and overwrite the old event.
82