Snmp Agent - Comtrend Corporation CT-5361T User Manual

By default, the log level is "Debugging", which is the lowest critical level.
The log levels are defined as follows:
Emergency = system is unusable
Alert = action must be taken immediately
Critical = critical conditions
Error = Error conditions
Warning = normal but significant condition
Notice= normal but insignificant condition
Informational= provides information for reference
Debugging = debug-level messages
Emergency is the most serious event level, whereas Debugging is the least
important. For instance, if the log level is set to Debugging, all the events
from the lowest Debugging level to the most critical level Emergency level
will be recorded. If the log level is set to Error, only Error and the level
above will be logged.
Display Allows the user to select the logged events and displays on the View
Level System Log window for events of this level and above to the highest
Emergency level.
Mode Allows you to specify whether events should be stored in the local memory,
or be sent to a remote system log server, or both simultaneously. If
remote mode is selected, view system log will not be able to display events
saved in the remote system log server.
When either Remote mode or Both mode is configured, the WEB UI will
prompt the user to enter the Server IP address and Server UDP port.
STEP 3: Click View System Log. The results are displayed as follows.

9.3 SNMP Agent

Simple Network Management Protocol (SNMP) allows a management application to
retrieve statistics and status from the SNMP agent in this device. Select the
Enable radio button, configure options, and click Save/Apply to activate SNMP.
83