Internet Time - Comtrend Corporation CT-5361T User Manual

ACS Password
Connection Request
Authorization
User Name
Password
The Get RPC Methods button forces the CPE to establish an immediate connection
to the ACS. This may be used to discover the set of methods supported by the ACS
or CPE. This list may include both standard TR-069 methods (those defined in this
specification or a subsequent version) and vendor-specific methods. The receiver of
the response MUST ignore any unrecognized methods.

9.5 Internet Time

This option will automatically synchronize the router time with Internet timeservers.
To enable time synchronization, tick the corresponding checkbox
preferred time server(s), select the correct time zone offset, and click Save/Apply.
NOTE: Internet Time must be activated to use
In addition, this menu item is not displayed when in Bridge mode since the
router would not be able to connect to the NTP timeserver.
Protocol. This username is used only for HTTP-based
authentication of the CPE.
Password used to authenticate the CPE when making a
connection to the ACS using the CPE WAN Management
Protocol. This password is used only for HTTP-based
authentication of the CPE.
Tick the checkbox
Username used to authenticate an ACS making a Connection
Request to the CPE.
Password used to authenticate an ACS making a Connection
Request to the CPE.
to enable.
Parental Control
85
, choose your
(page 56).