Connection to USB
Before connecting the CT-5361T to a PC with the USB cable, the USB device driver
must first be installed. See the sections 2.2 and 2.3 for detailed instructions.
Connection to LAN
Use RJ45 cable to connect up to four network devices. These ports are
auto-sensing MDI/X and either straight-through or crossover cable can be used.
Connection to LINE
Connect the ADSL line to this port with a RJ11 cable.
2.2 USB Device Driver Auto-run Installation
Before connecting the CT-5361T to a PC with USB, the correct drivers must be
installed. The auto-run USB driver installation supports Win ME, Win 98, Win 2000,
Win XP (32 bit) and Vista (32 bit). For those using Windows XP 64 bit, the driver
must be installed manually (please see the following section for details).
Follow the procedure below to install the standard (32 bit) USB driver
STEP 1: Insert the Installation CD and select Install USB Driver from the
autostart menu shown below.
6