DHCP Server Relay: Enable with checkbox
To configure a secondary IP address, tick the checkbox
IP Address: Enter the secondary IP address for the LAN port.
Subnet Mask: Enter the secondary subnet mask for the LAN port.
Ethernet Media Type
Select between Auto, 10_Half, 10_Full, 100_Half and 100_Full options.
NOTE:
The Save button simply saves changes, while the Save/Reboot button
both saves and reboots the device to make any changes effective.
This allows the Router to relay the DHCP packets to the
remote DHCP server. The remote DHCP server will provide
the IP address. This option is hidden if NAT is enabled
47
and enter DHCP Server IP address.
outlined (in RED) below.