6.6.2
Static Route
This option allows for the configuration of static routes. Click Add to create a new
static route. Click Remove to delete the selected static route.
Click the Add button to display the following screen.
Enter Destination Network Address, Subnet Mask, Gateway IP Address, and/or WAN
Interface. Then click Save/Apply to add the entry to the routing table.
6.6.3
RIP
To activate RIP, select the Enabled radio button for Global RIP Mode. To configure
an individual interface (PVC), select the desired RIP version and operation, and then
select the Enabled checkbox
save the configuration and start/stop RIP (based on the Global RIP mode selected).
for that interface (PVC). Click Save/Apply to
60