Table of Contents
Advertisement
6.4
Security
To display the Security function, you need to enable the firewall feature in the WAN
Setup.
6.4.1
IP Filtering
IP filtering allows you to create a filter rule to identify outgoing/incoming IP traffic
by specifying a new filter name and at least one condition below. All of the specified
conditions in this filter rule must be satisfied for the rule to take effect. Click
'Save/Apply' to save and activate the filter.
Outgoing
Note: The default setting for all Outgoing traffic is Accepted.
To add a filtering rule, simply click the Add button. The following screen will be
displayed.
61
Advertisement
Table of Contents
