Printing Takes Too Long; Printer Resets Or Turns Off Frequently - Xerox 560 User Manual

Printing Takes Too Long

Probable Causes
The printer is set to a slower printing mode
(forexample, heavyweight stock).
The printer is in power saving mode.
The job is very complex.

Printer Resets or Turns Off Frequently

Probable Causes
The power cord is not correctly plugged into the
outlet.
A system error occurred.
Solutions
It takes more time to print with special media. Make sure
that the media type is set properly in the printer driver and at
the printer control panel.
It takes time for printing to start in power saving mode.
Wait. No action needed.
Solutions
Turn off the printer, confirm that the power cord is correctly
plugged into the printer and the outlet, then turn on the
printer.
Contact your local Xerox service representative with the fault
information. Check the fault history. For details, see Control
Panel Messages.
Troubleshooting
Xerox Color 550/560 Printer
User Guide
285