Caution:
If you use preprinted sheets such as letterhead, make
sure the ink on those sheets can withstand the 374˚ F
(190˚ C) temperatures. If not, the ink could cause
permanent damage to the printer's fusing rollers. Also,
never use a partial sheet of labels or a sheet where the
glue has soaked through the labels.
Avoid media which
•
Is too thick, thin, rough or extremely textured (such as
course or embossed stock)
•
Has been or is wet, damp, curled, torn, creased, or
otherwise damaged
•
Has metal clasps, strings, staples, cutouts, or perforations
•
Is coated or synthetically reinforced stock
•
Has exposed adhesives (such as partially used label stock)
When you select media, keep in mind that the physical page size is
different from the imageable area. The imageable area is the area
which can be printed on by your printer.
You should set the page margins in your applications to fit within the
imageable areas. If you try to print outside the imageable area, many
applications issue a warning or error message, giving you an
opportunity to make changes; some applications clip the image and
still print the page.
___________________________________
Routine Operations 6-5