Xante Accel-a-Writer 8200 Manual page 10

d. Determine the leading edge of the paper. This varies
depending on the printing mode and paper size. See the
previous section, "Feeding Media to the Printer," to
determine the leading edge.
3. Slide the paper printing side up, making sure the trailing edge
fits under the two plastic clips at the rear of the cassette and the
leading edge fits under the two metal clips at the front corners
of the cassette (fig. 6.2).
Caution: Make sure the paper stack does not exceed the
upper paper limit marked on the cassette. This can
cause the paper to jam.
Fig. 6.2 Load the Paper Cassette
4. Slide the cassette into the printer until it snaps into place.
6-10 Routine Operationsbb
Paper Limit Mark
__________________________________