Xante Accel-a-Writer 8200 Manual page 36

Removing downloaded fonts from a SCSI hard disk varies depending
upon the environment in which you work. The rest of this section
covers the Macintosh environment and then the PC environment.
In a Macintosh Environment, if you want to download fonts, the
Downloader included in your XANTÉ Utilities works best. See
"Loading Printer Fonts" in chapter 3 for details on downloading and
listing fonts on a SCSI disk.
To remove a font from the SCSI disk
1. Make sure the SCSI disk is powered on and attached to the
printer's SCSI interface.
Caution: DO NOT confuse the serial and SCSI interface
ports when connecting the cables. This will cause
permanent printer damage that is not covered under
the warranty. Printer ports are labeled clearly.
2. Locate the Downloader 5.0.5 utility and double-click the icon
to open the utility.
3. Choose Download Font from the File menu. After the program
locates the printer, a screen similar to the following appears.
Outline Fonts Available:
Fonts
Ameri
AmeriBol
AmeriExtBol
AmeriIta
AvantGarBoo
AvantGarBooObl
AvantGarDem
AvantGarDemObl
BenguBol
BenguBoo
Bodon
BodonBol
BodonBolIta
BodonPos
BookmDem
Fig. 6.16 Remove Fonts from Disk
4. Make sure Disk (not Memory) is selected in the upper right
corner of the window.
6-36 Routine Operationsbb
Outline Fonts Selected:
Device Disk
Macinto...
Ameri
AmeriBol
Eject
Desktop
Add
Add All
Remove
Cancel
Download
__________________________________