2.
Open the front cover by pulling the release latch on the right
side and tilting the cover towards you. This exposes the fuser
unit and print delivery guides (fig. 6.7).
Warning!
The fuser unit and print delivery guides can become
extremely hot during printing and cause severe burns.
Do not touch these areas.
Delivery Guide
Fig. 6.7 Adjusting the Print Density Dial
3.
Locate the density dial on the left (fig. 6.7).
6-24 Routine
Operationsbb
Reduce
Density
__________________________________
Increase
Density
Density Dial
Fuser
Unit