Xante Accel-a-Writer 8200 Manual page 8

When you print using the letter/A4 or B5 size cassette with plain and
laser paper, the media loads in landscape orientation with the long
edge first. For larger sized cassettes, load the media in portrait
orientation with the short edge first.
When you use the fold down tray, letter, B5, and A4 media loads
long edge first in landscape orientation. Legal, ledger, and A3 media
loads short edge first in portrait orientation.
Other variable custom sized media that measures between 3.90" x
5.80" (99 mm x 147 mm) and 11.81" x 25.00" (300 mm x 635 mm)
and that is not square always should be loaded short edge first; this
also holds true if you have the extra wide print option for printing on
12.00" x 19.00" (305 mm x 485 mm) and 12.00" x 25.00" (305 mm x
635 mm) media.
Note: The Manual Feed menu allows you to select letter, legal, A4,
B5, 11 x 17, A3, COM-10, MONARCH, DL and C5 sizes
through the front panel. To print from the fold down tray on a
media size not listed in this menu, select the size through a
software application. (Application selections override front
panel selections.) Remember that if the extra wide print option
is installed, 11.81" x 19.00" and 11.81 x 25.00" convert to the
extra wide sizes; to get the standard smaller sizes, you would
enter their page sizes through an application.
If you use a larger cassette than the Letter/A4 tray, install the cassette
cover on the back of the printer by gently squeezing in on each side
of the cover and snapping it into place as shown in figure 6.1. This
cover prevents dust and debris from getting into the paper tray and
building up in the printer where it can reduce print quality.
6-8 Routine Operationsbb __________________________________