Xante Accel-a-Writer 8200 Manual page 37

Hide thumbs Also See for Accel-a-Writer 8200:

Table of Contents

Select the font(s) you want to remove. If you want to select an

individual font, click Remove, and skip to step 7.

Note: If you want to remove only a few fonts, you must

select each one separately and click Remove.

Select any font in the right-hand window. The Add All

selection changes to Remove All. Then, select Remove All to

remove all the fonts.

Wait until the removing process finishes.

Choose Quit from the File menu.

In a PC Environment, if you want to download fonts to a SCSI

disk, use the downloader in the Adobe Windows driver located under

Printer Setup. See "Loading Printer Fonts" in chapter 4 for details.

To remove fonts from a SCSI drive, you have two options. First, you

can use PSDown.exe which comes with your fonts. See the

PSDown.exe documentation for details. This is the best method if

you want to remove only a few of the fonts.

Your second choice is to reinitialize the SCSI disk by downloading

the INITDSK.PS file. See "Initializing a Hard Disk with the PC" in

chapter 2 for details.

___________________________________

Routine Operations 6-37

Table of Contents